Low intensity solar powered aviation obstruction light

This low intensity solar power obstruction light adopts insert solar panel whose photoelectric conversion efficiency is high to 19% integrated design, cooperate with solar dedicated lithium iron phosphate battery as power supply. Control circuit adopts micro-power consumption single chip microcomputer control chip, which can more precise  control the battery’s charge and discharge status; Meanwhile, it can reduce controlling circuit ’s power consumption; Light source adopts special customized LED chip, which has the specific of high light intensity, low power consumption, long service life and so on. Lampshade adopts PC material, which can corrosion resistance, anti-UV anti-shock. The base adopts marine-grade dedicated plastic material, it can apply to seaways, bridge and chemical plant that have hostile and strong corrosive environment.

Function & Features

  1. Continuous working time in rainy day can reach more than 20 days. (10 hours a day)
  2. Photocell can switch ON/OFF the light in rainy days or at night automatically.
  3. Standardization of optical design, high photoelectric conversion efficiency.
  4. Adopts high efficient solar chip,photoelectric conversion efficiency is over 19%.
  5. The integration of the waterproof design, it can work in soaking in sea water, High protection grade IP68.
  6. Adopts special customized LED chip,transfer efficiency and service life is higher than normal LED.
  7. Circuit adopts advanced charging and discharging management system,prolong battery’s life effectively.
  8. The lamp extend state switch, it can adjust steady or flashing light working mode base on requirement.
  9. Provides strong corrosion resistance, lightning resistance,UV resistance, impact resistance.
  10. The base adopts marine-grade dedicated plastic material,it can apply to seaways ,riverway,chemical plant and airport that have hostile and strong corrosive environment.
  11. With anti-bird device.
  12. No radio frequency (rf), no electromagnetic interference.
  13. Steady working, low cost.

Usage notice

  1. Please read the instruction carefully and then use the device correctly.
  2. Solar powered marine lantern must be installed in a sunny place to keep it working continuously.
  3. Please install this light on the Installation plane that perpendicular to light axis, installation plane should has mechanical strength.
  4. If the device fails to work at the first using time, please place the device under sunlight to recharge power 12hours, it will work.
  5. Please turn off the device and put it in a dry place, to ensure the life of the battery.please put it in a sunlight for 5day(s) to recharge power each 3 months if it needs to be stored for a long time.
  6. If there any other problem please contact us.

Name

Parameter

Name

Parameter

Type

GS-LS/A, GS-LS/B

Light Source Service Life

>100000 hours

Power Supply

Class A high efficient solar panel

Optional Emitting Color

Red

Battery capacity

3.2V3.3AH

Battery Type

Replaceable lithium iron phosphate battery

Solar panel power

2W

   Battery life

>5years

Solar panel voltage

5.5V

Solar panel life

>20years

Instantaneous power

≤2W

Vertical Divergence

>8°

Visual range

>4nm

Horizontal Out-put

360°

Light source

LED

Overall Size(mm)

186mm(D)×190mm(H)

Storage temperature

-40℃~70℃

Installation Size

170mmx170mm×M6

Working Temperature

-20℃~60℃

Anti-wind Ability

80m/s

steady light intensity

20CD

flashing light intensity

>36CD

Weight

1.2kg

Working mode

Flashing/steady(default flash 20 times/m)

Continuous working  time in rainy day

> 20days( work 10 hours a day)

Optically Controlled Ambient Brightness

300LUX±100LUX

IP Standard

IP68

 

  1. Block
  2. Bridge
  3. Towers
  4. Communication tower
  5. Chimney
  6. Airport runway
  7. Taxiway
  8. Temporary military airport
  9. Runway edge lights
  10. Navigation beacon light
  11. Heliport
  12. Traffic barrier
  13. Tower cranes

Contact us

Your Name: (*)

Your Tel: (*)

Your Email: (*)

Your Message