GS-LI/D Low-intensity Double Aviation Obstruction Light

GS-LI/D Low-intensity Double Aviation Obstruction Light is used as a steady burning red light that marks all fixed obstructions to prevent air navigational hazards. When fixed obstructions are less than 45m, one double aviation obstruction light can be used.

GS-LI/D Low-intensity Double Aviation Obstruction ,Base with high intensity aviation aluminum casting,Fully sealed structure ;Light source adopt with independent research and development dedicated LED chip ,which have the specific of low power consumption and long long life ;Lampshade adopt with PC material ,it can resist corrosion ,anti-UV ,anti-shock ;management circuit with  Strong lightning protection and With the surge protection device,which can adopt to extremity bad working environment .This lamp with photoswich ,it can turn on when light intensity less than 50LUX,and turn off when above 50Lux.

Features

  1. Stainless steel baked with the lacquer base.
  2. Special LED chips, with brightness, low energy consumption and long life.
  3. PC material cover, provides strong corrosion resistance, UV resistance, impact resistance.
  4. With lightning protection ability and control circuit with anti surge protective device that can apply to poor working environment.
  5. With light-operated switch. When under the condition of less than 50Lux light, it can automatically switch ON the light, and if it under the conditions of over 50Lux light, it can automatically switch OFF.

Attention/ Usage Tips

  1. Check whether the supply voltage does comply with the rated voltage of device.
  2. Donot open it if the device is out of operation, in order not to be hurt by the internal high pressure.
  3. Afterfinished the installation, the personnel must check whether the device is in a good waterproof processing and whether the screw spikes are tight
  4. Non-professional workers can not do the device maintenance, in order not to expand the error and be hurt.
Name Parameter
 FAA Classify L-810
Type GS-LI/D
Power Supply Optional voltage: AC220V, AC120V, DC12V, DC24V, DC48V
Power Supply Frequency 50HZ~60HZ
Average Power Consumption ≤3W
Working Mode Optional: steady burning, flashing, steady burning backup, flash alternately
Light Intensity Type B ≥32.5cd    Type A ≥10cd
Horizontal Out-put 360°
Vertical Divergence 10°
 Light Source service Life ≥20 years
Emitting Color Red
Overall Size 285mm×136mm×320mm
Installation Size 3/4inches or 1 inch
IP Protection IP65
Optical Ambient Brightness 50/100Lux
Ambient Temperature -40℃~70℃
Weight 3kg
Anti-Wind Ability 120m/s
  • Building
  • Airport
  • High Mastlamp
  • Chimney
  • Towers(Telecom, GSM, Electric)
  • Bridge
  • High-rise Buildings

Contact us

Your Name: (*)

Your Tel: (*)

Your Email: (*)

Your Message

Contact us

Your Name: (*)

Your Tel: (*)

Your Email: (*)

Your Message