GS-LI/B Low intensity Single Aviation Obstruction Light

GS-LI/B Low-intensity Single Aviation Obstruction Light is used as a steady-burning red light that marks all fixed obstructions to prevent air navigational hazards. When fixed obstructions are less than 45m, a single light can be used.

GS-LI/B Low-intensity Single Aviation Obstruction Light,Base with high intensity aviation aluminum casting,Fully sealed structure ;Light source adopt with independent research and development dedicated LED chip ,which have the specific of low power consumption and long long life ;Lampshade adopt with PC material ,it can resist corrosion ,anti-UV ,anti-shock ;management circuit with  Strong lightning protection and With the surge protection device,which can adopt to extremity bad working environment .This lamp with photoswich ,it can turn on when light intensity less than 50LUX,and turn off when above 50Lux.

Features

  1. PC material with good impact protection strength, thermal stability, high transmittance.\
  2. Bird spike against bird drop.
  3. International-advanced cold LED with low power consumption, high brightness and service life of light source reaching 100,000hours.
  4. LED based on obstruction light last 15 times longer than traditional light source, incandescent light.
  5. About 96% less power than 116W incandescent light.
  6. Major maintenance cost saving,Surge protection device inside light.
  7. Strong corrosion resistance, Shock and Vibrations protection and UV protection.
  8. Dawn to Dusk operating: Built-in photocell can let light work automatically at night, closed during the day.
  9. 3/4inch or 1inch installation size and small volume especially being suitable for telecom and flag-pole installation way.
  10. There is one switch converting between Flashing mode and Steady-burning mode.
  11. Five Years Warranty Period.

Attention / Usage Tips

  • Check whether the supply voltage does comply with the rated voltage of device.
  • Donot open it if the device is out of operation, in order not to be hurt by the internal high pressure.
  • Afterfinished the installation, the personnel must check whether the device is in a good waterproof processing and whether the screw spikes are tight
  • Non-professional workers cannot do the device maintenance, in order not to expand the error and be hurt.

 

 

Name Parameter 
FAA Classify L-810
Type GS-LI/B
Power Supply Optional voltage:AC220V, AC120V, DC12V,DC24V,DC48V
Supply Frequency 50HZ~60HZ
Power Consumption ≤3W
Working Mode Adjustable choice: steady-burning/flashing 20times/min
Light Intensity Type B ≥32.5cd    Type A≥10cd
Horizontal Out-put 360°
Vertical Divergence 10°
Light Source Service Life ≥20 years
Emitting Color Red
Overall Size 136mm×136mm×220mm
Installation Size  3/4inches or 1 inch
IP Protection IP65
Optical Ambient Brightness 50/100Lux
Ambient Temperature -40℃~70℃
Weight 1kg
Anti-wind Ability 120m/s
  • Block
  • Airport
  • High Mastlamp
  • Chimney
  • Towers(Telecom, GSM, Electric)
  • Bridge
  • High-rise Buildings

Contact us

Your Name: (*)

Your Tel: (*)

Your Email: (*)

Your Message

Need help? Email Us Here! Chat With Us Now!

← Prev Step

Thanks for contacting us. We'll get back to you as soon as we can.

Please provide a valid name, email, and question.

Powered by LivelyChat
Powered by LivelyChat Delete History